4 Slot Crimping Swaging Tool Kit To Join High Tensile Steel Wires Ropes With 4 S

FenceMate 4 Slot Crimping Swaging Tool Kit to Join High Tensile Steel Wires, Ropes with 4 Sizes Assorted Sleeves, Spanner & Gauge Tool, 18 Hand Crimper Swager for Splicing Wires, Ropes with Ferrules. The Tool Kit comes with one 18 inch, 4-slot crimping (swaging) tool and 4 sizes of assorted crimp sleeves, one tool gauge (to check wire gauge) and ring spanner (to adjust screw).

The Tool Kit allows a wide range of metal wires, wire ropes or cables to be swaged (crimped, spliced) with loop, oval, stop sleeves, ferrules, especially excellent performance for high tensile steel fence wires with our gritted crimp sleeves. Steel blade drop forged for super hardness, cast joint arms cast to assure high strength. Thickened, anti-slip, insulated, ergonomic rubber handle provides secure and comfortable experience. #1-2 slot for 14.5 and 15.5 gauge wire; #2-3 slot for 12.5 gauge wire; #3-4 slot for 10 and 11 gauge wire, 14 and 15 gauge barbed wire; #4-5 slot for 9 gauge wire, 12.5 and 13.5 gauge barbed wire. This 4-slot crimping tool allows a wide range of wire or cable to be spliced with crimp sleeves Attached with tool gauge, ring spanner.

The comfortable grip handles make this 4-slot crimping tool easier to operate. INSTRUCTIONS FOR FOUR-SLOT CRIMPING TOOL To check a sleeve which has been crimped, use the compression gauge provided. Turn adjusting screw clockwise about 1/4 turn. Recrimp sleeve and check with gauge.

Repeat as needed until the crimped portion of the sleeve fits into the proper slot of the gauge. When adjustment is correct, tighten locking screw. Clean and oil tool occasionally. Except for some resistance at final closing, empty tool should work freely. Please wait for the result of cancellation.

The order will be processed and completed by automatic warehouse system within 5 minutes. Sending direct message to cancel the order is not allowed for every case.

---